How we work
We are a window replacement and installation company, and that is the whole of it. We do not roof, we do not resurface patios, and we do not sell a window as a doorway into a larger remodel. Openings are the entire trade: measuring them, ordering the right unit for the wall it sits in, cutting back stucco without cracking the field, flashing so water leaves the building, and sealing so conditioned air stays inside. A crew that installs windows every working day gets a different result than a general contractor who installs them occasionally.
The in-home measure is the job
Nearly every window problem we get called back to fix on somebody else's work traces to the measure. An opening that was sized from the outside, a retrofit insert forced into a frame that had already racked, a west elevation given the same glass as a north one. None of that shows up on install day. It shows up two summers later as a warped sash, a fogged unit, or a room nobody wants to sit in at four in the afternoon.
So we measure every opening individually, inside and out, and we check the frame itself before we recommend anything. A sound frame takes a retrofit insert and keeps your interior trim. A frame with dry rot at the sill, racking at the corners, or previous water damage gets full-frame replacement, because putting a new window into a failed frame buys a few years at best.
Glass is specified per elevation, not per house
A house in the Inland Empire does not take heat evenly. The west and south walls carry the afternoon load; the north side barely sees it. Specifying one glass package for the whole house means overpaying on the shaded side and under-protecting the side that is actually cooking your flooring and furniture. We write the order elevation by elevation: lower solar heat gain and a more aggressive low-E coating where the sun lands, clearer glass where you want the light, tempered where code requires it near doors, tubs, and stairs, obscure where a bathroom faces a neighbor.
Every unit we install carries its NFRC label showing U-factor and SHGC, and every package we quote meets California Title 24. We leave those labels on until you have seen them.
What the walkthrough actually produces
The estimate visit is not a sales presentation with a folder of laminated pages. It is a measure, a frame inspection, and a conversation about which openings matter most to you. You get frame and glass samples in your hand, in your own light, next to your own trim.
| Stage | What we do | What you get |
|---|---|---|
| Walkthrough | Measure every opening, inspect frames and sills, note elevation and exposure | Retrofit or full-frame recommendation per opening, in writing |
| Specification | Match frame material and glass package to each elevation and code requirement | Frame and glass samples to compare in your own light |
| Order | Units built to your measurements, not to stock sizes | Confirmed sizes and lead time before anything is ordered |
| Install | Stucco cut-back where needed, flashing, setting, sealing, trim | Openings closed the same day they are opened |
| Walk-off | Operate every sash and lock with you, check screens, haul the old units away | NFRC labels intact and warranty paperwork in hand |
The person who measures is accountable for the install
We keep the measure and the install connected on purpose. Whoever writes your order is answerable for what shows up on the truck and how it goes into the wall. Nothing gets handed off to a subcontractor who never saw the opening and has no stake in whether the numbers were right.
Where we work
Riverside is the base, and the housing stock here is what we know best: the single-pane aluminum sliders in the postwar tracts, the original wood sash in the Wood Streets, the ranch homes around Canyon Crest and Hawarden Hills, the newer builds in Orangecrest where builder-grade dual pane is now failing at the seals. From here crews reach both counties, working the SR-91, I-215, SR-60, and I-10 corridors out to Corona, Moreno Valley, Fontana, Redlands, and the rest of our service areas.
What we install
Vinyl and fiberglass are what we recommend most in this climate, and we install both alongside aluminum and wood-clad where a home calls for it. Products come from established manufacturers including Milgard, Andersen, Anlin, Simonton, and Pella. We install what suits the wall and the exposure rather than steering every job to one line.
The scope runs from a single custom or picture window to whole-house replacement, plus sliding patio doors, bay and bow build-outs, egress windows, and commercial storefront glazing.
What we stand behind
Our workmanship carries a lifetime warranty, and it sits alongside the manufacturer's own product warranty on the units themselves. Those cover different things and it is worth knowing which is which: the manufacturer answers for the window, we answer for how it went into your wall. We are licensed and insured, and we will hand you the paperwork on both without being asked.
We answer the phone and we do not text. If you want a straight read on whether your windows need replacing or whether you can get a few more years out of them, call (951) 899-2469 and we will tell you honestly, including when the answer is that you should wait.